FM Sailing Tacktick Mast Bracket
Designed and 3D printed in house, our tacktick mast bracket is the perfect way to jazz up your boat.
We print using a robust, UV stable filament, which means you can buy with confidence knowing that you’re not getting a cheap knock off that’s going to shrink, distort, or break after a week.
Our bracket works in conjunction with the Raymarine Tacktick Microcompass, which is class legal on many dinghies.
Key Features:
Recesses for your nyloc nuts, so it’s easier to screw your cradle on, no need for a spanner or pliers!
Locating fins on the rear of the bracket slot into the mast track and stop the bracket from being knocked side to side.
ProGrip Pads on the rear of the bracket help to pad the bracket against the mast section.
Mast brackets will be supplied with a length of doublesided velcro to strap round the mast, and a length of sticky-back velcro which applies to the front face of the mast and holds the bracket in place.
If you require nuts and bolts to connect your bracket to your cradle, please select the option below and we will send four M4 x 25mm Countersunk Machine Screws, and four M4 nyloc nuts, all in marine grade stainless steel (A4).
Designed and 3D printed in house, our tacktick mast bracket is the perfect way to jazz up your boat.
We print using a robust, UV stable filament, which means you can buy with confidence knowing that you’re not getting a cheap knock off that’s going to shrink, distort, or break after a week.
Our bracket works in conjunction with the Raymarine Tacktick Microcompass, which is class legal on many dinghies.
Key Features:
Recesses for your nyloc nuts, so it’s easier to screw your cradle on, no need for a spanner or pliers!
Locating fins on the rear of the bracket slot into the mast track and stop the bracket from being knocked side to side.
ProGrip Pads on the rear of the bracket help to pad the bracket against the mast section.
Mast brackets will be supplied with a length of doublesided velcro to strap round the mast, and a length of sticky-back velcro which applies to the front face of the mast and holds the bracket in place.
If you require nuts and bolts to connect your bracket to your cradle, please select the option below and we will send four M4 x 25mm Countersunk Machine Screws, and four M4 nyloc nuts, all in marine grade stainless steel (A4).
Designed and 3D printed in house, our tacktick mast bracket is the perfect way to jazz up your boat.
We print using a robust, UV stable filament, which means you can buy with confidence knowing that you’re not getting a cheap knock off that’s going to shrink, distort, or break after a week.
Our bracket works in conjunction with the Raymarine Tacktick Microcompass, which is class legal on many dinghies.
Key Features:
Recesses for your nyloc nuts, so it’s easier to screw your cradle on, no need for a spanner or pliers!
Locating fins on the rear of the bracket slot into the mast track and stop the bracket from being knocked side to side.
ProGrip Pads on the rear of the bracket help to pad the bracket against the mast section.
Mast brackets will be supplied with a length of doublesided velcro to strap round the mast, and a length of sticky-back velcro which applies to the front face of the mast and holds the bracket in place.
If you require nuts and bolts to connect your bracket to your cradle, please select the option below and we will send four M4 x 25mm Countersunk Machine Screws, and four M4 nyloc nuts, all in marine grade stainless steel (A4).
